things to build free projects
Plans for free   
Plans for kids   
Site rules   
Things to build pergola
Copyright © 2001 - 2006
Single Garage Plans
3.1m (10' 2") x 6m (20ft) Shell only
single garage
Copyright © 2003 Buildeazy.Com Ltd. All rights reserved. These and other plans in this site are the property of We thank Buildeazy for allowing us to host this freeplan in our site. Many other plans can be found at

Page 3: Flat plan

garage flat plan

Wall frame plan and stud outlay
This plan shows the placement of the studs from a bird's-eye-view. In this particular plan, the studs are spaced at 600 [2ft] crs or o.c. (which means "at centers" or "on center"). This means the studs are spaced apart 600 (2ft) from the center of one stud to the center of the adjoining stud.

Studs spaced at 600 [2ft] crs/o.c. are also placed appropriately to accommodate standard width 1200 [4ft] cladding or lining, either exterior and interior.

Footing and post (pile) plan
This plan shows the placement of the posts and where the footing holes should be dug, from a bird's-eye-view. The holes should be 300 [1ft] square and 450 [18"] deep.
This does not take into account any special requirements. For example, in areas prone to frost, the bottom of the footing should be below the frost line.

There should be a thickness of concrete at least 100 [4"] between the underside of the post and the bottom of the hole. The holes should be spaced at max 1200 [4ft] crs/o.c. (at centers/on center).

NOTE: The posts should be a minimum of 150 [6"] above ground level, with a layer of durable vapor barrier between the top of the post and the bottom plate of the wall frame (sole plate/bottom plate/wall plate)

Click on a hyperlink below to go to that page.
bullet Page 1: Introduction
bullet Page 2: Identifying the parts
bullet Page 3: Flat plan
bullet Page 4: The wall frames
bullet Page 5: The roof
bullet Page 6: Detail
bullet Page 7: The eaves
bullet Page 8: The exterior cladding
bullet Page 9: The roof cladding
bullet Page 10: The angle cuts
bullet Page 11: Bracing and fastening
bullet Page 12: Materials list
bullet Page 13: Cutting list
bullet Page 14: Glossary of terms
bullet Page 15: A guide to building the garage
<< previous page      next page >>



Copyright © 2001 - 2006 - All rights reserved. Reproduction of any material
in this website is strictly prohibited without expressed written permission.